Non Marking Clamps

Gentle Grip Clamp Type TSS

The Camlok TSS Plate Clamp has been designed to handle material without marking or causing damage to the surface finish. The clamp is particularly useful for handling stainless steel plate when it is important not only to preserve the surface finish but also not to impregnate the steel with ferrous material.

The main wedge shaped jaw manufactured from aluminium is adjusted to suit the load plate thickness by turning the removable handle. The fixed jaw is manufactured from stainless steel. Both jaws have smooth surface finishes. Lifting via the hook ring activates the internal mechanism gripping the plate between both smooth jaws. The clamp incorporates an additional serrated tooth moving jaw that is activated if the load starts to slip.

The clamp can be used to lift and turn plates from the horizontal to vertical position and vice versa.

Gentle Grip Clamp Type TSB

The TSB Gentle Grip Clamp is designed to lift and handle various types of material such as steel, timber, plastics, laminates etc. without causing damage to the surface finish. The fixed pad and horizontally moving jaw are lined with hard wearing rubber (Bremsit). The lateral gripping load is transmitted to the moving jaw via a short length of chain routed between two chain pulleys. The clamp can be used to lift plates from the horizontal to vertical position and vice versa. Ensure that load surfaces are free from oil, water, rust or loose paint prior to attaching the clamp.

Gentle Grip Clamp Type LJ

The LJ range of clamps is specifically designed to lift plates without marking or damaging the surface finish. The clamp is suitable for lifting various types of plate materials eg. - steel, timber etc. The clamp is particularly suitable for lifting thin gauge steel plate, aluminium and stainless steel. The clamp is also suitable for steels with a surface hardness above 300 Brinell. The performance of the leather jaws is not affected by standing water, so the clamp can be used, with submerged plasma cutting machines. The clamp is a low cost alternative to our TSS range of gentle grip clamps, and particular attention to the maintenance and replacement of leather pads is necessary. See clamp operator instructions for detailed information.

For further information or to request a quotation please contact
sales@lifting-safety.co.uk

To assist us in responding quickly to your enquiry please always include relevant information on your enquiry such as SWL, Height of Lift and where required Electricity phase.

Thank You