Master Link KM Generous internal dimensions ensure that the KM series Master Links will fit on to a wide range of crane hooks.
For 3 & 4 leg slings, two KAL Auxiliary Links must be attached or the KMML range utilised.
Litalink KMML A cost effective alternative to the KM/KAL assembly for three and four leg slings. Designed for use only under
the uniform load method of working load rating for general use
Kuplink KS Alternative Master Link for single leg slings, dispensing with the need for Kupler
Auxiliary Link KAL Mecahically assembled link for three and four leg slings
Reevable Egg Links KSS The ideal link for collar slings - fully reevable and compact 7mm - 26mm
Kupler K This component is used for joining chain to the top link
Safety Hook KHXC Designed so that the latch cannot open under load. and requires pressure on the trigger to release the hook when load is grounded 7mm - 16mm
Safety Hook KHXE A variant on the KHXC with eye instead of clevis. 7mm - 16mm
Safety Hook KHXS A variant on the KHXC with bow and swivel instead of clevis. 7mm - 13mm
Shackle KDL Has a wide jaw and attached directly to the chain. Complete with bolt, hexagon nut and cotter pin 7mm - 19mm
Narrow Jaw Shackle KDN Similar to KDL Series but for applications calling for narrower 7mm - 16mm
Grab Hook KG The narrow throat is intended to engage one link of chain. The preferred use is in lashing chain and similar assemblies. It is not suitable for slinging and should never be used for shortening sling legs. 7mm - 23mm
Shortening Clutch KSCN Caters for loads of irregular shape or for a general lack of headroom and allows safe leg length adjustment of any number of legs with the load remaining fully in line.
